Taps
Find Out More
Taps
Single Faucet – Available in chrome or brushed nickel finish.
When you have a normal sink tap and you do not wish to change it, you can add filtered water with a single faucet fitted to the side of your sink. Water regulations require that a tap is fitted over a drain, hence the reason for the sink, but in cases where there is no sink, we can provide a drain to fit under the spout of the faucet, provided that we can run a drain pipe from underneath, to a suitable outlet.
Double Faucet – Available in chrome.
For those situations where more than one new outlet is required, but changing a whole tap to a combination outlet such as a Quooker is not practical or affordable. These allow 2 different streams of water. They do not mix so for example, it can be used for chilled water and sparkling water, or for room temperature water and chilled.
Tri-flow Taps
The tri-flow, or 3 way tap, is a British invention that is now copied around the world. It is most often sold when a water softener is fitted so that a choice can be given, normally between softened cold water and unsoftened cold, with the hot normally always softened. The unsoftened choice can be filtered if necessary, and it is suitable for other choices as well such as adding a chiller or a chiller / sparkling unit.
Bear in mind that, in most instances, the cold water tap on a kitchen sink in a home is often the most used tap in the property. Being able to soften the water for that gives benefits for most of the uses of that cold water, whilst at the same time improving the economics of the softener purchase and to then have the choice of unsoftened water at the same time, offers a choice on every occasion.
Dolomite Tri-flow Flexi Hose Tap
Available in Brushed Brass, Chrome Plated, Matt Black and Brushed Nickel.
Cottage Tri-flow Tapp
Available in Brushed Brass, Chrome Plated, Brushed Nickel and Brushed Bronze.
Modern Tri-flow Tap
Available in Brushed Brass, Chrome Plated, Matt Black and Brushed Nickel.
Classic Tri-flow Tap
Available in Chrome Plated and Brushed Nickel.
Altea Tri-flow Spring Hose Tap
Only available in Brushed Brass
Aqualaria Tri-flow Tap
Only available in Brushed Brass
Chiller Units
Chiller Unit – Small
Suitable for small families, this unit will produce chilled water between 3° – 6° C and will supply approximately 1.2 litres before the water warms. Recovery time is approximately 15 minutes.
This unit might require ventilation.
Chiller Unit – Medium
Suitable for larger families, this unit will produce chilled water in the range of 3°-10° C if the incoming water is no higher than 20° C and room temperature is no more than 25°C. This unit will supply up to 15 litres / hour with one litre taking approximately 40 seconds based on incoming pressure of 3 bar.
This unit will require ventilation.
Chiller Unit and Sparkling Water Unit – Medium
Suitable for larger families, this unit will produce chilled water in the range of 3°-10° C if the incoming water is no higher than 20° C and room temperature is no more than 25°C. This unit will supply up to 15 litres / hour with one litre taking approximately 40 seconds based on incoming pressure of 3 bar.
The carbonator unit can carbonate 0.5 litres at any one time.
This unit will require ventilation.
Filters
We sell filters from 2 different ranges:
The Omnipure range is a simple filter system which allows the user to simply unscrew the filter and replace it. Filters are suitable for 6 month or 12 month use, making them economical when compared to other ranges and filter jugs.
The Pentek range is a worldwide range of 10” filters which fit inside a standard housing. The housing can be multiplied to make multiple filter sets and different filters can be used to obtain the result required. These filters generally last for 12 months in the UK but depends on volume of use.
Water Purifiers
Reverse Osmosis – Pure Water
Reverse osmosis (RO) water purifiers are able to produce an amazing level of water purity and remove nearly all contaminants.
The Reverse osmosis process is able to remove approximately 95% of contaminants such as chlorine, lead, fluorides, bacteria and viruses, as well as unpleasant tastes and odours from water. The result is a highly pleasing, fresh tasting drinking water.
Traditional RO systems operate on mains water pressure using a semi-permeable membrane. This rejects impurities and washes them down the drain. The pure water is collected and stored in a tank for use at a later time.
The drawbacks of this system are that the proportion of water used to wash away the contaminants can be very high as the
process is water pressure and temperature dependant. Some systems waste 9 litres of water to produce just one litre.
Compact 75 RO Unit
The Compact 75 Water Purifier uses just 1.75 litres of wash water to produce each litre of pure water . The Compact 75 system utilises a high pressure pump and the very latest membrane technology to produce up to 11 litres per hour of pure drinking water.
The Compact 75 includes a Cartridge life indictor. The use of larger bore pipework for the tap and tank connections ensures the highest flow to tap is available. Easy to change filter cartridges.
This unit should be fitted where the water hardness is no more than 170mg/l and the life of the filters will be exceptionally enhanced if it is provided with softened water to purify.
Pre and post filter life is approximately 12 months. The membrane life is as much as 3 years on softened water.
This unit has a storage tank which holds approximately 3.5 litres and will provide up to 3 litres/ min to a tap.
Features:
- High performance carbon pre and post filters.
- Plastic storage tank with 3/8” connections.
- Super Compact design for under sink installation or under plinth.
- High performance membrane
- Cartridge reminder system
- Waste water ratio 1.75: 1
Direct 800 RO Unit
The New Direct Flow 800 system utilises a high pressure pump and the very latest membrane technology to produce pure drinking water on demand at a flow rate of 2 litres per minute. The system also monitors and displays feed water quality as well as the purity of the drinking water in real time. By eliminating the storage tank from the system the Direct Flow 800 Water Purifier eliminates the possibility of stagnation, temperature gain and tank failure/contamination.
This unit should be fitted where the water hardness is no more than 170mg/l and the life of the filters will be exceptionally enhanced if it is provided with softened water to purify.
Pre and post filter life is approximately 12 months. The membrane life is as much as 3 years on softened water.
Features:
- High performance carbon pre and post filters.
- No storage tank required.
- Compact design for under sink installation.
- High performance membrane
- Leak Protection
- Cartridge reminder system
- Real time water quality monitoring
- Waste water ratio 1:1